Turkish-German University
Department of Robotics and Intelligent Systems
BIOMECHANICS LAB.
PUBLICATIONS
M.Sc. Thesis
The analysis of joint torques during bi-manual manipulation of two human arms by EMG using , Istanbul University, Department of Mechanical Engineering, 2005 (Supervisor: Dr. Nurkan Yagiz, Dr. Mehmet Arif Adli).signals
Ph.D. Thesis
Mechanics and force optimization analysis of the musculoskeletal system , Istanbul University, Department of Mechanical Engineering, 2009 (Supervisor: Dr. Nurkan Yagiz).
Patents
1. Gultekin BA, Karabulut D., Sevuk C., Arslan Y.Z., Cansiz E., Dental membrane fixation system driven by pneumatic system (Pnömatik sistem tahrikli dental membran sabitleme sistemi) Submitted as: Turkey Patent. (Patent No: TR 2017 21934 B).
2. Arslan YZ, Cansiz E., Atalay B., Turan F. (2017): Patient-specific sagittal split osteotomy guide and soft tissue retractor (Kişiye özel sagital split osteotomi rehberi ve yumuşak doku retraktörü). Turkey Patent (Patent No: 2013/05722).
Book Chapters
1. Arslan Y.Z., Hacioğlu Y., Taşkin Y., Yağiz N., Control of A Biomimetic Robot Hand Finger: Classical, Robust And Intelligent Approaches, Handbook of Research on Advancements in Robotics and Mechatronics (2 Volumes), Habib M, Eds., IGI Global Publications , Hershey, 475-499, 2015.
2. Arslan Y.Z., Örteş F., Biyomekanik Uygulamalar için Temel Mekanik, Temel Kinezyo-Mekanik Klinik Örnekli Anlatım, N. Ekin Akalan, Yener Temelli, Ed., İstanbul Tıp Kitap Yayınevi, Istanbul, 1-81, 2016.
3. Yilmaz R., Sezgin A., Kurnaz S., Arslan Y.Z., Object Oriented Programming in Computer Science, Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes), Mehdi Khosrow-Pour , Eds., IGI Global Publications , Hershey, 7470-7480, 2018.
4. Sürmen H.K., Akalan N.E., Arslan Y.Z., Design, manufacture, and selection of ankle-foot-orthoses, Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes), Mehdi Khosrow-Pour , Eds., IGI Global Publications , Hershey, 298-313, 2018.
5. Örteş F., Karabulut D., Arslan Y.Z., General Perspectives on Electromyography Signal Features and Classifiers Used for Control of Human Arm Prosthetics, in: Encyclopedia of Information Science and Technology, Fourth Edition (10 Volumes), Mehdi Khosrow-Pour , Eds., IGI Global Publications , Hershey, 492-504, 2018.
6. Arslan YZ, Karabulut D., Ortes F., Popovic M., Exoskeletons, exomusculatures, space suits, Biomechatronics , 1st edition, Marko Popovic, Ed, Academic Press, Elsevier, 305-331, 2019.
7. Ortes F., Cansiz E., Arslan YZ., Computer-aided-design of subject-specific dental instruments for preoperative virtual planning in orthognathic surgery, Biomanufacturing, 1st edition, Prakash, C., Singh, S., Singh, R., Ramakrishna, S., Pabla, B.S., Puri, S., Uddin, M.S. (Eds.), Springer, 89-102, 2019.
8. Surmen HK, Ortes F., Arslan YZ, Fundamentals of 3D printing and its applications in biomedical engineering, 3D Printing in Biomedical Engineering, 1st edition, Singh S, Prakash C, Singh R, Springer, 23-41, 2020, https://doi.org/10.1007/978-981-15-5424-7_2
9. Yagiz A., Dogru S.C., Üzel M., Kocaelli H., Arslan Y.Z., Cansiz E., Design of patient-specific maxillofacial implants and guides. In: Sharma N.R., Subburaj K., Sandhu K., Sharma V. (eds) Applications of 3D printing in Biomedical Engineering. Springer, Singapore, 121-131, 2021, https://doi.org/10.1007/978-981-33-6888-0_5
Papers in Peer Review Journals indexed by SCI&SCI-E
1. Yagiz, N., Arslan, Y.Z., Hacioglu, Y., 2007, Sliding mode control of a finger for a prosthetic hand , Journal of Vibration and Control, 13(6), 733-749.
2. Arslan, Y.Z., Yagiz, N., Hacioglu Y., 2008, Prosthetic hand finger control using fuzzy sliding modes , Journal of Intelligent and Robotic Systems, 52(1), 121-138.
3. Hacioglu, Y., Arslan, Y.Z., Yagiz, N., 2008, PI+PD type fuzzy logic controlled dual-arm robot in load transfer, Strojniski Vestnik - Journal of Mechanical Engineering, 54(5), 347-355.
4. Arslan, Y.Z., Hacioglu, Y., Yagiz, N., 2009, Fuzzy sliding mode control of a humanoid robot hand finger, Expert Systems, 26(3), 291-303.
5. Karamehmetoglu, S.S., Ugur, M., Arslan, Y.Z., Palamar, D., 2009, A quantitative skin impedance test to diagnose spinal cord injury, European Spine Journal, 18(7), 972-977.
6. Arslan, Y.Z., Adli, M.A., Akan, A., Baslo, M.B., 2010, Prediction of externally applied forces to human hands using frequency content of surface EMG signals , Computer Methods and Programs in Biomedicine, 98(1), 36-44.
7. Yagiz, N., Hacioglu, Y., Arslan, Y.Z., 2010, Load transportation by dual arm robot using sliding mode control , Journal of Mechanical Science and Technology, 24(5), 1177-1184.
8. Hacioglu, Y., Arslan, Y.Z., Yagiz, N., 2011, MIMO fuzzy sliding mode controlled dual arm robot in load transportation, Journal of the Franklin Institute, 348(8), 1886-1902.
9. Arslan, Y.Z., Demirer, R.M., Palamar, D., Ugur, M., Karamehmetoglu, S.S., 2012, Comparison of the data classification approaches to diagnose spinal cord injury , Computational and Mathematical Methods in Medicine, 2012, Article ID 803980, 7 pages.
10. Sezgin, A., Arslan, Y.Z., 2012, Analysis of the vertical vibration effects on ride comfort of vehicle driver, Journal of Vibroengineering, 14(2), 559-571.
11. Arslan, Y.Z., Jinha, A., Kaya, M., Herzog, W., 2013, Prediction of muscle forces using static optimization for different contractile conditions , Journal of Mechanics in Medicine and Biology, 13(3), 1-13, 2013.
12. Cansiz, E., Arslan, Y.Z., Turan, F., Atalay, B., 2014, Computer-assisted design of patient-specific sagittal split osteotomy guide and soft tissue retractor, Journal Medical and Biological Engineering, 34(4), 363-367.
13. Arslan, Y.Z., Sezgin, A., Yagiz, N., 2015, Improving the ride comfort of vehicle passenger using fuzzy sliding mode controller, Journal of Vibration and Control, 21(9), 1667–1679.
14. Arslan, Y.Z., 2015, Experimental assessment of lumped-parameter human body models exposed to whole body vibration, Journal of Mechanics in Medicine and Biology, 15(3), 1550023-1-13.
15. Cansiz, E., Dogru, S.C., Arslan, Y.Z., 2015, Comparative evaluation of the mechanical properties of resorbable and titanium miniplates used for fixation of mandibular condyle fractures, Journal of Mechanics in Medicine and Biology, 15(2), 1540032-1-8.
16. Cansiz, E., Turan, F., Arslan, Y.Z., 2016, Computer-aided design and manufacturing of a novel maxillofacial surgery instrument: Application in the sagittal split osteotomy, Transaction of ASME Journal of Medical Devices, 10(4), 044505 (4 pages), doi:10.1115/1.4034297.
17. Karabulut, D., Ortes, F., Arslan, Y.Z., Adli, M.A., 2017, Comparative evaluation of EMG signal features for myoelectric controlled human arm prosthetics, Biocybernetics and Biomedical Engineering 37, 326-335.
18. Dogru, S.C., Cansiz, E., Arslan, Y.Z., 2018, A review of finite element applications in oral and maxillofacial biomechanics, Journal of Mechanics in Medicine and Biology , 18(2), 1830002 [26 pages].
19. Surmen, H.K., Akalan, N.E., Fetvaci, M.C., Arslan, Y.Z., 2018, A novel dorsal trimline approach for passive-dynamic ankle-foot orthoses, Strojniški Vestnik - Journal of Mechanical Engineering, 64(3), 185-194.
20. Eren, Y., Adanir, O., Dincel, Y.M., Genc, E., Arslan, Y.Z., Caglar, A., 2018, Effects of low molecular weight heparin and rivaroxaban on rat Achilles tendon healing , Joint Diseases & Related Surgery-Eklem Hastalıkları ve Cerrahisi, 29(1), 13-19.
21. Dincel, YM, Caglar AK, Adanir O, Arikan Y, Dogru SC, Arslan YZ, 2018, Effects of high-dose vitamin C and hyaluronic acid on tendon healing , Acta Ortopédica Brasileira, 26(2), 82-85.
22. Dincel, Y.M., Alagoz, E., Arikan, Y., Caglar, A.K., Dogru, S.C., Ortes, F., Arslan, Y.Z., 2018 Biomechanical, histological and radiological effects of different phosphodiesterase inhibitors on femoral fracture healing in rats , Journal of Orthopaedic Surgery 26(2), 1–9.
23. Taskin, Y., Hacioglu, Y., Ortes, F., Karabulut, D., Arslan, Y.Z., 2019, Experimental investigation of biodynamic human body models subjected to whole-body vibration during vehicle ride, International Journal of Occupational Safety and Ergonomics, 25(4), 530-544.
24. Bulat, M., Korkmaz, N., Arslan, Y.Z., Herzog, W., 2019, Musculoskeletal simulation tools in understanding the mechanisms of the lower limb sports injuries, Current Sports Medicine Reports, 18 (6), 210-216.
25. Cansiz, E., Karabulut D., Dogru S.C., Akalan N.E., Temelli Y., Arslan Y.Z., 2019 Gait analysis of patients subjected to the atrophic mandible augmentation with iliac bone graft, Applied Bionics and Biomechanics,Volume 2019, Article ID 8203597, 9 pages.
26. Denizoglu Kulli, H., Karabulut, D., Saka, T., Akan, A., Arslan, Y.Z., 2019, Force irradiation effect of kinesiotaping on contralateral muscle activation, Human Movement Science 66, 310-317.
27. Dogru, S.C., Cansiz E., Arslan Y.Z., 2019 Biomechanical evaluation of resorbable and titanium miniplates and of single and double miniplates for the treatment of mandibular condyle fractures, Biocybernetics and Biomedical Engineering 39(3), 709-718.
28. Karabulut D, Dogru SC, Lin YC, Pandy M, Herzog W, Arslan YZ., 2020 Direct validation of model‐predicted muscle forces in the cat hindlimb during locomotion, Journal of Biomechanical Engineering, 142(5): 051014.
29. Dincel YM, Sari A, Tekin C, Gunaydın B, Cetin MU, Arslan YZ, 2020, Changes in bone mineral density after total knee arthroplasty, Acta Ortopédica Brasileira, 28(5):247-250.
30. Arslan YZ, Karabulut D., Kahya S, Cansiz E., 2020, Biomechanical evaluation of implantation approaches for the treatment of mandibular total edentulism, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 234(10): 1139-1150.
31. Arslan YZ, Karabulut D., 2021, Sensitivity of model-predicted muscle forces of patients with cerebral palsy to variations in muscle-tendon parameters, Journal of Mechanics in Medicine and Biology, 21(01), 2150008.
32. Surmen HK, Arslan YZ, 2021, Evaluation of various design concepts in passive ankle-foot orthoses using finite element analysis, Engineering Science and Technology-An International Journal-JESTECH (in press).
33. Dogru SC, Arslan YZ, 2021, Effect of model parameters on the biomechanical behavior of the finite element cervical spine model, Applied Bionics and Biomechanics, vol. 2021, Article ID 5593037, 9 pages https://doi.org/10.1155/2021/5593037 .
34. Karabulut D, Arslan YZ, Salami F, Wolf SI, Götze M, 2021, Biomechanical assessment of patellar tendon advancement in patients with cerebral palsy and crouch gait, The Knee, 32(2021), 46-55 (https://doi.org/10.1016/j.knee.2021.07.010).
35. Karabulut D, Arslan YZ, Götze M, Wolf SI, 2021, The Impact of Patellar Tendon Advancement on Knee Joint Moment and Muscle Forces in Patients with Cerebral Palsy, Life, 11(9):944. https://doi.org/10.3390/life11090944
36. Akıncı SZ, Arslan YZ, 2022, Finite element spine models and spinal instruments: a review, Journal of Mechanics in Medicine and Biology, 22(04), Article No. 2230001 https://doi.org/10.1142/S0219519422300010.
37. Ortes F, Jinha A, Herzog W, Arslan YZ, 2022, Sensitivity of muscle force response of a two-state cross-bridge model to variations in model parameters, Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, 236(10):1513-1520. Doi: 10.1177/095441192211220.
Papers in Peer Review Journals indexed by other than SCI&SCI-E
1. Akıncı SZ, Karabulut D, Sürmen HK, Yaman O, Arslan YZ, 2022, The Effect of PEEK-Rod Fixation Systems on Finite Element Lumbar Spine Model, European Journal of Science and Technology, 34 (783-786).
2. Ortes F, Arslan YZ, 2021, İskelet kaslarındaki kuvvet üretim mekanizmasının Huxley tipi kas modelleriyle incelenmesi, Dokuz Eylül Üniversitesi Tıp Fakültesi Dergisi, 2021;35(3):415-426.
3. Arslan Y.Z., Serebral Palsili Çocukların Yürüme Karakteristiğinin Değerlendirilmesi, Avrupa Bilim ve Teknoloji Dergisi, 20:77-84, 2020.
4. Sürmen H.K., Örteş F., Arslan Y.Z., "Design and Production of Subject Specific Insole using Reverse Engineering and 3D Printing Technology", International Journal of Engineering and Science Invention, vol.5, pp.11-15, 2016.
5. Arslan Y.Z., Turan F. , Cansız E., "Sagital Split Osteotomi Rehberi ve Yumuşak Doku Retraktörünün Tasarımı ve Üretimi", Süleyman Demirel Üniversitesi Mühendislik Bilimleri ve Tasarım Dergisi, cilt.2, ss.135-140, 2014.
6. Arslan Y.Z., Gündoğdu U., Sayin A., Akan A., Kocasoy Orhan E., Baslo M.B., "Interpretation Of Muscle Fatigue Using Temporal And Spectral Moments Of Emg Signals", WSEAS Transactions on Signal Processing, no.5, pp.656-661, 2006.
Refereed International Conference Proceedings
1. Arslan, Y.Z., Akan, A., Adli, M.A., Estimation of the human arm tip forces by using EMG signals , Proceedings of the 3rd European Medical and Biological Engineering Conference, Prague, Czech Republic, November 20-25, 2005, Vol 11.
2. Arslan, Y.Z., Adli, M.A., Akan, A., Investigation of the relationship between EMG signals and the forces applied to human arms , Proceedings of the 4th International Conference on Electrical and Electronics Engineering, Bursa, Turkey, December 7-11, 2005, 199-203.
3. Gundogdu, U., Sayın A., Akan, A., Arslan, Y.Z., Orhan E.K., Baslo M.B., Investigation of muscle fatigue using temporal and spectral moments , Proceedings of the 5th WSEAS International Conference on Signal Processing, Istanbul, Turkey, May 27-29, 2006, 10-14.
4. Arslan, Y.Z., Hacioglu, Y., Modeling and control of a humanoid robot hand finger , Proceedings of the 5th International Symposium on Intelligent Manufacturing Systems, Sakarya, Turkey, May 29-31, 2006, 1141-1149.
5. Yagiz, N., Hacioglu, Y., Arslan, Y.Z., Robust control of a prosthetic hand finger , Proceedings of the 5th European Symposium on Biomedical Engineering, Patras, Greece, July 7-9, 2006.
6. Arslan, Y.Z., Tunç M., Orhan E.K., Baslo M.B., Observations on the characteristics of EMG signals recorded at different depths , Proceedings of the 5th European Symposium on Biomedical Engineering, Patras, Greece, July 7-9, 2006.
7. Hacioglu, Y., Arslan, Y.Z., Akan, A., Yagiz, N., PI-type fuzzy logic control of a dual arm robot , Proceedings of the 9th WSEAS International Conference on Automatic Control, Modeling & Simulation, Istanbul, Turkey, May 27-29, 2007, 42-45.
8. Yagiz, N., Hacioglu, Y., Arslan, Y.Z., Simultaneous trajectory manipulation of a dual-arm robot using sliding mode control , Proceedings of the 12th International Conference on Aerospace Sciences & Aviation Technology, Cairo, Egypt, May 29-31, 2007, ROB 1-12.
9. Karamehmetoğlu, Ş.S, Ugur, M., Arslan, Y.Z., Palamar, D., The determination of the level of spinal cord injury according to the measurement of skin resistance , 46th International Spinal Cord Society Annual Scientific Meeting, Reykjavik, Iceland, June 27 - July 1, 2007, p110.
10. Arslan, Y.Z., Ulus, T., Yagiz, N., Assessment of force prediction performances of the phenomenological musculotendinous unit models , 15th Scientific Convention on Engineering nnd Architecture – 6th Cuban Congress of Mechanic Engineering and Metallurgic Engineering, Havana, Cuba, November 29 – December 3, 2010.
11. Arslan, Y.Z., Palamar, D., Karamehmetoglu, S.S., Ugur, M., Can we determine the level of spinal cord injury in a quantitative manner?, International Society of Biomechanics Congress, Brussels, Belgium, July 3-7, 2011.
12. Arslan, Y.Z., Kaya, K., Herzog, W., Evaluation of muscle force predictions using optimization theory , International Conference on Mathematical Modeling in Physical Sciences, Budapest, Hungary, September 3-7, 2012.
13. Cansız, E., Arslan, Y.Z., Turan, F., Atalay, B., Design and production of a novel computer assisted, patient specific sagittal split osteotomy guide and soft tissue retractor, 7th International ACBID Congress, Antalya, Turkey, 29 May- 2 June 2013.
14. Arslan, Y.Z., Kaya, M., Jinha, A., Herzog, A., Static optimization solution to the force sharing problem , XXIV Congress of the International Society of Biomechanics, Natal, Brazil, August 4-9, 2013.
15. Arslan, Y.Z., Turan, F., Cansiz, E., Design and manufacture of a patient-specific surgical device for sagittal split osteotomy , 7th World Congress of Biomechanics, Boston, USA, July 6-11, 2014.
16. Cansiz, E., Dogru, S.C., Arslan, Y.Z., Evaluation of different fixation materials for mandibular condyle fractures , XIX International Conference on Mechanics in Medicine and Biology, Bologna, Italy, September 3-5, 2014.
17. Arslan, Y.Z., Cansiz, E., Turan, F, Application of a maxillofacial surgery instrument manufactured by laser sintering in the sagittal split osteotomy, 8th International Symposium on Mechanics of Materials and Structures, 5-8, Augustow, Poland, May 31-June 3, 2015.
18. Karabulut, D., Dogru, S.C., Cansiz, E., Arslan, Y.Z., Akalan, N.E., Evaluation of gait characteristics of patient subjected to the atrophic jaw augmentation, 2nd International Conference on Electrical, Computer, Mechanical and Mechatronics Engineering, Istanbul, Turkey, 27-28 August 2015.
19. Ortes F., Surmen H.K., Arslan Y.Z., A biomechatronic application on prosthetics for undergraduate engineering students , International Conference on Education in Mathematics, Science& Technology (ICEMST), Mugla, Turkey, 19-22 May 2016.
20. Surmen H.K., Akalan N.E., Arslan Y.Z., Temelli Y., Evaluation of an ankle-foot-orthosis designed for children with spina bifida , International Conference on Research in Education and Science (ICRES), Mugla, Turkey, 19-22 May 2016.
21. Surmen H.K., Ortes F., Arslan Y.Z., An educational application of 3d printing technique used for insole production , International Conference on Education in Mathematics, Science& Technology (ICEMST), Mugla, Turkey, 19-22 May 2016.
22. Surmen H.K., Fetvaci M.C., Arslan Y.Z., Mechanical analysis of an ankle-foot orthosis using finite element method , International Conference on Research in Education and Science (ICRES), Mugla, Turkey, 19-22 May 2016.
23. Cansiz E., Doğru S.C., Karabulut D., Arslan Y.Z., Temelli Y., Akalan N.E., "Evaluation of Preoperative and Postoperative Gait Analysis of Patients Subjected to Iliac Crest Augmentation for the Treatment of Maxillary Alveolar Atrophy", Turkish Association of Oral and Maxillofacial Surgery 23rd International Scientific Congress-TOAMS 2016, Mugla, Turkey, 26-30 May 2016, pp.34-34.
24. Bulat M., Dinç E., Begovic H., Arslan Y.Z., Bayraktar B., "Effects of a Functional Exercise Program on Injury Prevention in Young Male Soccer Players ", International Sport Medicine Conference-CASEM Annual Symposium 2016, Victoria, Canada, 19-21 May 2016, vol.26, no.3, pp.e88-e92.
25. Karabulut D., Doğru S.C., Arslan Y.Z., Li Y.C., Pandy M., Herzog W., "Development of a computational musculoskeletal model of the cat hind limb", International Conference of the Polish Society of Biomechanics-BIOMECHANICS 2016, Biala Podlaska, Poland, 5-7 September 2016, pp.-1-2.
26. Kara M.B., Örteş F., Cansiz E., Arslan Y.Z., "Computer aided design of custom-made miniplates for virtual planning in orthognathic surgery", 9th International Symposium on Mechanics of Materials and Structures, Augustow, Poland, 4-8 June 2017, pp.92-94.
27. Çelik H., Arslan Y.Z., Arpınar Avsar P., "Rambling and trembling in the analysis of postural adjustments prior to the self-selected and reaction time tasks", 27th Annual Meeting of the Society for the Neural Control of Movement, Dublin, Ireland, 2-5 May 2017, pp.1-1.
28. Doğru S.C., Qui Y., Yang M., Arslan Y.Z., "A musculoskeletal spine model for predicting spinal muscle forces of a human body exposed to whole body vibration", 6th International Conference on Whole Body Vibration Injuries, Gothenburg, Sweden, 19-21 June 2017, 51(6), pp.68-70.
29. Koyluoglu N., Sahin O., Arslan Y.Z., Arslantaş R., Pallikaris I., "The importance of fundus autofluorescence (FAF) imaging to establish patient eligibility for the Argus® II retinal prosthesis system", FLOREtina 2017, Florence, Italy, 26-30 April 2017, vol.27, no.2, pp.e69-e70.
30. Koyluoglu Unal N., Turgut G., Bulat M., Sahin A., Marangoz D., Dogramaci M, Stanga P., Arslan Y.Z., "Management of the retinal break treatment in a coach who is former goalkeeper", XXVII Isokinetic Medical Group Conference-Football Medicine Outcomes-ARE WE WINNING, Barcelona, Spain, 2-4 June 2018, pp.561.
31. Dincel YM, Adanir O, Arıkan Y, Caglar AK, Dogru SC, Arslan YZ, Biomechanical and histopathological investigation of the effects of high-dose vitamin C and hyaluronic acid on tendon healing, 8th World Congress of Biomechanics, Dublin, Ireland, 8-12 July 2018.
32. Dogru SC, Qiu Y., Collier R., Arslan Y.Z., Assessment of the biodynamic response of human body exposed to whole-body vibration using apparent mass and muscle activation level , 8th World Congress of Biomechanics, 8 – 12 July 2018, Dublin, Ireland.
33. Karabulut D, Dogru SC, Lin YC, Pandy M, Herzog W, Arslan YZ, Modeling and simulation of the musculoskeletal system of the cat hind limb in Opensim, 8th World Congress of Biomechanics, 8 – 12 July 2018, Dublin, Ireland.
34. Denizoglu Kulli H, Karabulut D, Saka T, Akan A, Arslan YZ, The effect of kinesiotaping on force irradiation, 9th International Biomechanics Congress, Eskisehir, Turkey, 19-22 September 2018.
35. Karabulut D, Korkmaz N, Aydil S, Beng K, Arslan YZ, Modeling and simulation of musculoskeletal system of patient with cerebral palsy, 9th International Biomechanics Congress, Eskisehir, Turkey, 19-22 September 2018.
36. Dincel, Y.M., Alagoz, E., Arikan, Y., Caglar, A.K., Dogru, S.C., Ortes, F., Arslan, Y.Z., Effects of sildenafil and pentoxifylline on femoral fracture healing in rats, 9th International Biomechanics Congress, Eskisehir, Turkey, 19-22 September 2018.
37. Ortes F, Karabulut D, Arslan YZ, Mechanical responses of subject-specific and traditional insoles regarding the reduction of the effects lower limb abnormalities, 1st International Symposium on Graduate Research in Science Focus on Entrepreneurship and Innovation, Istanbul, Turkey, 4-6 October 2018.
38. Karabulut D, Ortes F, Arslan YZ, Classification performance of EMG signal features extracted from original and transformed time series, 1st International Symposium on Graduate Research in Science Focus on Entrepreneurship and Innovation, Istanbul, Turkey, 4-6 October 2018.
39. Karabulut D, Gultekin A, Cansiz E, Sevuk C, Arslan YZ, Development of a novel membrane fıxation system intended to use in oral surgery, 1st International Symposium on Graduate Research in Science Focus on Entrepreneurship and Innovation, Istanbul, Turkey, 4-6 October 2018.
40. Denizoglu Kulli H, Karabulut D, Saka T, Akan A, Arslan YZ, The Relationship between Elbow Joint Torques of Active Limbs with Cross-Activation, 1st International Symposium on Graduate Research in Science Focus on Entrepreneurship and Innovation, Istanbul, Turkey, 4-6 October 2018.
41. Doğru SC, Qui Y, Collier R, Arslan YZ, The biodynamic response of human body exposed To whole-body vibration, 1st International Symposium on Graduate Research in Science, Istanbul, Turkey, 4-6 October 2018.
42. Ugurlu B, Acer M, Barkana DE, Gocek I, Kucukyilmaz A, Arslan YZ, Basturk H, Samur E, Ugur E, Unal R, Bebek O, A Soft+Rigid Hybrid Exoskeleton Concept in Scissors-Pendulum Mode: A Suit for Human State Sensing and an Exoskeleton for Assistance, Proc. of the IEEE International Conference on Rehabilitation Robotics (ICORR), Toronto, Canada, 24-28 June 2019.
43. Dincel YM, Karabulut D, Arslan YZ, Knee Joint Reaction Force in Patients with Cerebral Palsy, International Conferences on Science and Technology (ICONST), 2-5 September 2020, Budva, Montenegro.
44. Akinci SZ, Sürmen HK, Karabulut D, Dogru SC, Yaman O, Arslan YZ, Biomechanical Effect of an Implant System on Lumbar Spinal Segments, 9th International Biomechanics Congress (BioMech 2021), İzmir, Turkey, 26-27 March 2021.
45. Akinci SZ, Karabulut D, Sürmen HK, Yaman O, Arslan YZ, The Investigation of the Effect of PEEK-Rod Fixation Systems on Pedicle Screws and The Adjacent Intervertabral Discs, 4th International Conference on Medical Devices (ICMD'2021), 10-12 June 2021, Gaziantep, Turkey.
Refereed National Conference Proceedings
1. Arslan Y. Z, Kinematic and dynamic analysis of a human hand model, National Machine Theory Symposium, Ankara, September 4-6, 2003, 29- 33 (in Turkish).
2. Arslan Y. Z., Akan A., Adlı. M.A, Uğur M., Baslo B., Analysis of forces applied to human hand using EMG signals, 2nd National Biomechanics Conference, Istanbul, November 26-27, 2004, 113-121 (in Turkish).
3. Arslan Y. Z., Akan A., Baslo M. B., Estimation of the forces applied to human hand by EMG signals, Signal Processing and Applications Symposium, Kayseri, May16-18, 2005 (in Turkish).
4. Arslan Y. Z., Gündoğdu U., Sayın., Akan A., Orhan E.K., Baslo M.B., Evaluation of the fatigue in human arms via electromyography signals, Signal Processing and Applications Symposium, Antalya, April 17-19, 2006 (in Turkish).
5. Arslan Y.Z., Schappacher G., Jinha A., Herzog W., Prediction of individual muscle forces using static non-linear optimization, 4th National Biomechanics Conference, October 16-17 2008, Erzurum, Turkey 214-220 (in Turkish).
6. Sezgin A., Arslan Y.Z., Yagiz N., Decreasing the effect of road induced vibrations on human body by sliding mode controller, 16th National Machine Theory Symposium, September 11-12 2013, Erzurum, Turkey, 34-41 (in Turkish).
7. Arslan, Y.Z., Turan, F., Cansiz, E., Design and manufacture of the sagittal split osteotomy guide and soft tissue retractor, Internationally Participated 7th National Biomechanics Congress, October 16-18 2014, Isparta, Turkey, (in Turkish).
8. Ortes, F., Karabulut, D., Arslan, Y.Z., Comparative evaluation of the EMG signal features for myoelectric controlled human arm prosthetics, BIYOMUT, November 6-7 2015, Istanbul, Turkey.
9. Cansiz, E., Dogru, S.C., Arslan, Y.Z., Mechanical evaluation of different fixation materials used for mandibular condyle fractures: finite element analysis, BIYOMUT, November 6-7 2015, Istanbul, Turkey (BEST PAPER AWARD).
10. Karabulut, D., Doğru, S.C., Arslan, Y.Z., Lin, Y.C., Pandy, M., Herzog, W., Development and validation of a musculoskeletal model of the cat hind limb, BIYOMUT, November 6-7 2015, Istanbul, Turkey.
11. Karabulut D., Doğru S.C., Cansiz E., Arslan Y.Z., Akalan N.E., Temelli Y., "Evaluation of gait characteristics of patient subjected to the atrophic jaw augmentation", 8. Ulusal Biyomekanik Kongresi, ANKARA, TÜRKIYE, 19-23 Ekim 2016, ss.1-1.
12. Arpınar Avsar P., Çelik H., Arslan Y.Z., "Açık ve Kapalı Becerilerde Harekete Hazırlık Safhasında Vücut Salınımı Değişimlerinin İncelenmesi", 8. Ulusal Biyomekanik Kongresi, ANKARA, TÜRKIYE, 19-23 Ekim 2016, ss.1-1.
13. Örteş F., Karabulut D., Arslan Y.Z., Herzog W., "Estimation of In Vivo Muscle Forces Using Artificial Neural Networks and EMG Signals", 8. Ulusal Biyomekanik Kongresi, ANKARA, TÜRKIYE, 19-23 Ekim 2016, ss.1-1.